Wire Mesh International: Express for Wire Mesh Importers & Exporters;Partner for China (Anping) International Wire Mesh Fair since 2001...
 

  Galvanized Wire Mesh Screen

People call galvanized hardware cloth by many different names, including, hot dipped screen wire, galvanized screen wire, or galvanised mesh. Sometimes its’ use is a name, like soffit screen or gopher screen, raccoon mesh, etc. It is an economical choice for industrial, agricultural and some residential uses. All hardware cloth is first woven or welded from steel wire and then dipped in a bath of molten zinc. This heavy zinc coating is also called galvanizing, serves to protect the mesh from corrosion, and stabilizes the crossover points of the wires, which makes them non-raveling. This family of meshes is sturdy and economical and heavy; not pretty and pricey.

Welded Hardware Cloth

The 1-inch mesh (1 mesh), the 2 mesh, and 4 mesh .025 inch are electrically welded before its galvanizing bath.

Woven Hardware Cloth

Minnow Traps are made from our Heavy Three Mesh (3x3 mesh) Galvanized after woven mesh. The heavy wire makes the heavy enough to sink the wooden framed traps without additional weights. Some of our customers allow the mesh to "weather" outdoors for a season to reduce the shiny appearance that may scare the minnows.

IF YOU NEED A MESH WITH ABOUT ONE INCH HOLES, ORDER “ONE MESH”.

1 mesh is another name for 1-inch mesh.

The wires are one-inch apart, center-to-center

IF YOU NEED A MESH WITH ABOUT HALF INCH HOLES, ORDER TWO MESH

2 mesh is another name for 1/2 inch mesh.

The wires are one half inch inches apart, center-to-center.

IF YOU NEED A MESH WITH ABOUT ONE-THIRD INCH HOLES, ORDER “THREE MESH”

3 mesh has wires that are 1/3 of an inch apart center to center.

IF YOU NEED A MESH WITH ABOUT ONE-QUARTER INCH HOLES, ORDER “FOUR MESH”

* 4 mesh is another name for 1/4 inch mesh.

* The wires are one-quarter inch apart, center-to-center.

IF YOU NEED A MESH WITH ABOUT ONE-FIFTH INCH HOLES, ORDER “FIVE MESH”

5 mesh has wires that are 1/5 of an inch apart center to center

IF YOU NEED A MESH WITH ABOUT ONE-EIGHTH INCH HOLES, ORDER, “EIGHT MESH”

8 mesh is another name for 1/8 inch mesh.

The wires are 1/8 inch apart, center-to-center.

We sell Galvanized hardware cloth in 100-foot rolls. The standard widths are 24, 36, and 48 inches wide. We also produce and stock standard narrow widths: 2, 2.5, 3, 4, 6, 8, and 12 inches wide by 100 feet long. We can also produce continuous 300-foot long roll lengths.

Custom widths up to 72 inches wide are available for orders of 50 rolls or more.

Tree guards - 2 mesh .041

Pole guards - (woodpecker mesh) 2 mesh .041

Stucco mesh - 2 mesh .41

Snake Protection Screen - 4 mesh .025

Silo linings - 3 mesh .035

Screen door guards - 2 mesh .063

Rodent proofing - 2 mesh .041 and 2 mesh .063

Minnow traps - 3 mesh .035

Pollen traps - 5 mesh .023

Soffit screens (also called bird block) - usually 4 mesh .025 or 8 mesh .017

Gutter guards - 4 mesh .025

Spark arrestors - 2 mesh .063 (consult your local building code)

Small cages - varies according to animal

Gunite backing - 2 mesh .041

Insulation support screen - 1 mesh .063

Raccoon control - 4 mesh .035 woven

Opossum control - 4 mesh .035 woven

Desert reptile funnel traps - 4 mesh .025 welded

Small bird control - 2 mesh .041

Bat control - 4 mesh .025

Bee and wasp control - 8 mesh .013 or 8 mesh .017

Plaster lath - 3 mesh .035

Closeouts, overstocks, and discount galvanized screen wire meshes may be available.

 

Our general range of hardware cloth runs from one-eighth, one –quarter inch, one-third inch, and one-half inch wire spacing. We sell these galvanized-after-welded steel meshes in cut pieces, discs, and narrow spools. 072506

http://www.hardwarecloth.org


Home | About Us | Fair Info | Products | Post Offers | Contact Us | Chinese

E-mail: wiremeshorg@hotmail.com | URL: http://www.wiremesh.org