Wire Material for Weaving Wire Mesh-Anping Fada Hardware & W

We mainly introduce material for weaving stainless steel wire mesh and brass wire cloth and characteristics of various material.

Stainless Steel Wire:
Material for weaving stainless steel wire mesh ( wire cloth ) is divided into Type 304, Type 304 L, Type 316 and Type 316 L.

Type 304
Often referred to as "18-8" ( 18% chromium, 8% nickel ) T-304 is the basic stainless alloy mostly commonly utilized for

wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit.

Type 304 L
Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics.

Type 316
Stabilized by the addition of 2% molydbenum, T-316 is an "18-8" alloy.

Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304.

Wire cloth woven of T-316 has extensive use in chemical processing when better corrosion resistance is required than the regular chromium-nickel types.

Type 316 L
Type 316 L is very similar to T-316, the difference being the reduced carbon content for better wire cloth weaving and secondary welding characteristics.

Brass Wire:
High brass (70% copper, 30% zinc) wire and low brass (80% copper, 20% zinc) wire have much better abrasion resistance, better corrosion resistance and lower electrical conductivity when compared to copper wire.

Anping Fada Hardware & Wire Mesh Product Factory specializes in manufacturing metal wire mesh, mainly stainless steel wire mesh and wire cloth, brass wire mesh and cloth.

We offer stainless steel wire mesh and brass wire mesh made of fine quality wire materials, strictly in accordance with international standard.

Recently, our quality management system with manufacture and sales of hardware wire cloth has been approved by ISOQAR to the standard of ISO9001:2000. This means that we can bring our customers better guaranteed products and services.

ISO9001:2000

The quality management system of this company with manufacture and sales of hardware wire mesh has been approved by ISOQAR to the standard of ISO9001:2000. This brings more international standard guarantee for the products and services our customers get from us. Certificates please refer to photos below.

Anping Fada Hardware & Wire Mesh Product Factory

Address: Changdi Development Zone, Anping, Hengshui, Hebei, P. R. China
Post Code: 053600

Tel: +86-0318-7525195
Fax: +86-0318-7518182

URL:http://www.hardwarewirecloth.com/
E-mail:sales@hardwarewirecloth.com