Stainless Steel Wire Mesh and Wire Cloth: Shengfa Co.

Stainless Steel Wire Mesh 
 
Stainless Steel Wire Mesh Square Opening

Anping ShengFa Metal Wire Mesh Co., Ltd. is the major manufacturer of stainless steel wire mesh of China, especially known for its best quality and excellent reputation. Stainless steel wire mesh square opening is in contrast with stainless steel wire mesh Dutch woven.

  Varieties of Stainless Steel Wire Mesh Square Opening:

Stainless Steel Square Wire Mesh produced by ShengFa is classified into two types according to weaving patterns:

Stainless steel square wire mesh plain woven
Stainless steel square wire mesh twill woven

Stainless Steel Wire Mesh Plain weave is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.

Twill Weave Stainless Steel Wire Mesh is made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.
Stainless Steel Square Wire Mesh Varieties according to materials:
Stainless steel square wire mesh type 304
Stainless steel square wire mesh type 304L
Stainless steel square wire mesh type 316
Stainless steel square wire mesh type 316L

Type 304 is often referred to as "18-8" ( 18% chromium, 8% nickel ) with the basic stainless alloy mostly commonly, utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit. Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics. Type 316 Stabilized by the addition of 2% molydbenum, T-316 is an "18-8" alloy. It has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304. Type 316 L is very similar to T-316, the difference being the reduced carbon content for wire cloth weaving and secondary welding characteristics.

Stainless Steel Square Wire Mesh Uses: Stainless steel wire mesh and stainless steel wire cloth products are widely used in petroleum, chemical industry, environment protection, mine, airspace, paper-making,electronic, metallurgy etc. Special size and specification are available according to customers requirement.

Stainless Steel Square Wire Mesh Sizes:

Standard roll width of stainless steel square wire mesh: 1m or 48"
Standard roll length of stainless steel square wire mesh: 30m or 100'

Company Info:

Anping ShengFa Metal Wire Mesh Co., Ltd.

--to meet your most technically demanding filter solution

Anping ShengFa Metal Wire Mesh Co., Ltd., started from 1995, is a joint venture with Taiwan partner. ShengFa has 56 sets state-of-the-art wire mesh machines to produce over 500,000 square meters woven wire mesh every year. Besides, this company also produce and custom produce different wire and metal products including welded wire mesh, woven wire conveyor belt, welded wire screen tubing, cylinder, metal wire mesh filters, etc.

Anping ShengFa Metal Wire Mesh Co., Ltd. is an expert in woven wire mesh and processing of filter components and fittings, especially custom wire mesh products to meet the requirements from most technically demanding industries and applications. 80% of wire mesh products offered by ShengFa are well sold to the USA, Japan, Taiwan and other countries and regions. Our featured products include various Stainless Steel Square Opening Wire Mesh, Custom and Special Dutch Woven Wire Cloth, Brass Wire Mesh and Wire Cloth, Red Copper Wire Mesh and Wire Cloth, Nickel Wire Mesh and Wire Cloth, Titianium Wire Mesh and Wire Cloth, different special alloy wire mesh and woven wire conveyor belts; processing of filter kits like welded tubes, cylinders, pieces, bags, various metal filters and some special wire mesh products.

ShengFa Metal Wire Mesh Co., Ltd. produces wire mesh from different metals and some special alloys. Our wire mesh products can be classified into three major series according to metal materials: Woven wire mesh of stainless steel and special alloy (320,304,304L, 310S, 316, 316L, 317L, 321,322, 430, Ti, Ai, OCY25Ai5, CY20Ni80); nonferrous metal wire mesh series ( H65, H68, H80, QSN6.5-0.1, Ti) and galvanized and ferrous metal series wire mesh products (Q195, Q215A, Q235A). Some wire mesh products of certain alloy can only be produced in this company.

ShengFa enjoys advanced equipment, excellent technology, full means of inspecition, quality wire mesh products, reasonal price and has won the trust of our customers.

Mr. You TsanFwu, the president, Mr. Wang Junfa, general manager and vice general manager, Mr.Wang Yakai of ShengFa Metal Wire Mesh Co., Ltd. warmly welcome business friends from home and abroad to visit our company.

Anping ShengFa Metal Wire Mesh Co., Ltd.

Address: East of Hongqi Street, Anping County, Hengshui City, Hebei, P. R. China 053600

Call:0086-318-7562898 7522905

Fax:0086 318 7522200

Mobile:13903282643

Attn:Wang YaKai

E-mail: info@shengfa-wiremesh.com